Please enable / Please enable JavaScript!
Please enable / Please enable Javascript![ ? ]

Replace the OSCam to OSCam 11342 EMU 735 arm Enigma2 для WeTeK Play

Замена OSCam на OSCam 11342 emu 735 arm Enigma2 для WeTeK Play

Replace the OSCam to OSCam 11342 EMU 735 arm Enigma2 для WeTeK Play

Satellite Media Box WeTeK Play Miracle foreign technology which I propose to finish in terms of the opening of paid satellite TV. This will be replacing regular, or nominally established a new OSCam OSCam version svn r11342 emu R735.

OSCam WeTeK Play oscam-emu-r11279_732-arm-linux-gnueabihf-ssl-libusb

This version of the emulator oscam Emu 1.20 SVN 11342 emu r735 compiled under CPU Cortex a9 Armv7 for use on digital HD receivers WeTek Play with IOS Enigma 2: Mnigma, OpenPli etc..

«Антикризисное предложение по бесплатному просмотру практически всех спутниковых телевизионных пакетов»


Unix starttime: 1484691982
Starttime:      18.01.2017 00:26:22
Version:        oscam-1.20-HPB-r661-EMU-r375-735-r11342
Compiler:       arm-linux-gnueabihf-libusb 
Box type:       wetek (generic)
PID:            1683
TempDir:        /tmp/.oscam
GBox TempDir:   /tmp/.oscam ConfigDir:      /etc/tuxbox/config/oscam/ 
WebifPort:      8888

Web interface support:                   yes LiveLog support:                         yes jQuery support intern:                   yes Touch interface support:                 no 
SSL support:                             no DVB API support:                         yes DVB API with AZBOX support:              no DVB API with MCA support:                no DVB API with COOLAPI support:            no DVB API with COOLAPI2 support:           no DVB API with STAPI support:              no DVB API with STAPI5 support:             no
DVB API read-sdt CHARSETS support:       yes Irdeto guessing:                         yes Anti-cascading support:                  yes Debug mode:                              yes Monitor:                                 yes Loadbalancing support:                   yes Cache exchange support:                  yes CW Cycle Check support:                  yes LCD support:                             yes
LED support:                             yes Clockfix with realtime clock:            yes IPv6 support:                            no Emulator support:                        YES

Chand 3.3x:                               yes camd 3.5 UDP:                            yes camd 3.5 TCP:                            yes newcamd:                                 yes CCcam:                                   yes CCcam share:                             yes gbox:                                    yes radegast:                                yes scam:                                    yes serial:                                  yes constant CW:                             yes Pandora:                                 Yes ghttp:                                   yes  Reader support:                          yes  Nagra:                                   yes Irdeto:                                  yes Conax:                                   yes Cryptoworks:                             yes Seca:                                    yes Viaccess:                                yes NDS Videoguard:                          yes DRE Crypt:                               yes TONGFANG:                                yes Bulcrypt:                                yes Griffin:                                 yes DGCrypt:                                 yes  cardreader_phoenix:                      yes cardreader_internal_azbox:               no cardreader_internal_coolapi:             No cardreader_internal_coolapi2:            no cardreader_internal_sci:                 Yes cardreader_sc8in1:                       Yes cardreader_mp35:                         Yes cardreader_smargo:                       yes cardreader_pcsc:                         no cardreader_smartreader:                  yes cardreader_db2com:                       yes cardreader_stapi:                        no cardreader_stapi5:                       no cardreader_stinger:                      Yes cardreader_drecas:                       Yes

To the point, firmware Mnigma, when initially setting up the system select and install the emulator OSCam (without emu). To replace OSCam emulator to a new oscam Emu 1.20 SVN 11342 EMU r735 should I replace the binary (executable file bin) which is available free of charge download link :

bin.oscam-emu-r11342_735-arm-linux-gnueabihf.7z 690 KB

Special features:
Pid-File control : without start-parameter "-(B)" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

Web - OSCamLogo with OSCamLabel (Weber -> config --> Weber -> OSCam Label)
(Example: set it to Box-Name ...)

Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.

Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")

User specific loadbalancer parameters:

User force always reopen:
Weber -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

lb_force_reopen_user = 0 or 1

Only if count reached lb_min_ecmcount:
Weber -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

lb_force_reopen_user_lb_min = 0 or 1

General date format:

Support tongfang version 3 NTIC2

Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)

Web - Special WebIf-Design included

This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam Key:
OSCam-EMU does not require, but will make use of "SoftCam Key" if available.
"SoftCam Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/where / Keys".

OSCam dvbapi config:

If dvbapi is activated, the "delayer" option is forced to have a value of at least 60.
This is to avoid freezes/crashes because of too fast ecm responses.

New Parameter:

Process EMM from stream:
Weber -> Config -> Stream Relay -> Process EMM from stream
0 - disabled (default)
1 - enabled  or in oscam.conf:

stream_emm_enabled = 0 or 1

BISS / config ConstCW:

Syntax for keys in SoftCam.Key: (key number can be '00' or '01')
(F) <service id><ecm pid> <key number> <key>


service id: 2222
ecm pid: 1111
key: 0102030405060708

(F) 22221111 00 0102030405060708

The correct ecm pid is only available when using oscam dvbapi.
For example:
oscam (dvbapi) <-> Osem
oscam (dvbapi) <-> oscam <-> OSEmu

When using another client like cccam, the ecm pid seen by OSEmu will always be '1FFF'
For example:
cccam <-> oscam <-> OSEmu
cccam <-> OSEmu
In this case the above example key line needs to be changed to:
F 22221FFF 00 0102030405060708

PowerVU config:

Keys in SoftCam.Key:

(P) <groupid><srvid> <nb> <key>
groupid = any 4 hex digits of your choice for this group (leading zeros are optional)
srvid = SID (Service ID) of channel in hex with leading zeros to make 4 hex digits.
nb = key number (00/01)
key = ecm key

Example groupid=0x1, sid=0x1234, keys 00 and 01:
(P) 00011234 00 11223344556677
(P) 011234 01 22334455667788

Example groupid=0x2, sid=0x34, keys 00 and 01:
(P) 00020034 00 00112233445566
(P) 0020034 01 00223344556677

For channels with the same srvid the correct key will be detected automatically, but each key needs a unique groupid.
P 009E0234 01 11223344556677
(P) 00040234 01 22334455667788
P 013E0234 01 33445566778899

WARNING - duplicate <groupid><srvid> are not allowed anymore - only the last instance will be used!

AU keys:
(P) <groupid> <UA> <key>
P 009E 11223344 11223344556677
P 009E 44332211 22334455667788
(P) 0004 22334455 33445566778899
P 013E 00112233 00112233445566

Multiple UA keys are allowed for each group and each UA will update ALL ecm keys in the group.

NOTE: in order to work, the ecm keys must be "seeded" in the file for each SID you want to update since the UA has no information about sids.
So to add a key that is unknown, enter a dummy key to get updated, for example:

(P) 00010004 00 00000000000000000
(P) 00010004 01 00000000000000000

Also note: Duplicate powervu keys are no longer allowed (unnecessary since duplicate SIDs should now have a unique group ID.)
So, if there are any duplicates, only the last key in the file will be used.
This also means that as new keys are found and appended to the file, they will automatically replace earlier keys.

On compatible Dreambox STBs:

1) Disable the Stream Relay:
Weber -> Config -> Stream Relay -> Mode
0 - disabled (default)
1 - enabled  or in oscam.conf:

stream_relay_enabled = 0

2) Select the correct DVB-Api extended CW API:
Weber -> Config -> DVB-Fire -> API for extended CWs
0 - disabled (default)
1 - OE 2.2
2 - OE 2.0

or in oscam.conf:

extended_cw_api = 2

On other devices the Stream Relay must be used:

The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.

For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (openpli, openatv), you can find it here:
OpenWebif -> Settings -> Customize

If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.

When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("etc.") with
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

When using DreamBoxEdit:

(A). Go to the list in the middle "Bouquet details".
(B). Right click on a channel, select "IPTV and other streaming services", select "Add".
(C). Select "DVB/TS".
(D). Chosse a name and use the new stream link as URL.
(E). Use the "Service ID" of the original channel. You can find it in the left list ("Services")

Drecrypt config:

Keys from ee.bin files:

Put "ee36.bin" and "the ee56.b" into the config folder (where SoftCam.Key is).
Or: set a custom path for these files with the "extee36" and "extee56" reader settings.

Keys in SoftCam.Key:

Overcrypt keys (16 keys):
(D) 0 <number> <key>
(D) 0 0 1122334455667788
(D) 0 (F) 1122334455667788

AU keys:
(D) <caid><provider> MK<key type><key index> <key>
D 4AE1FF MKAA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF

Tandberg config:

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> K01 <key>

64 keys are needed:

T 40 K01 1122334455667788
T 41 K01 1122334455667788
T 7F MK01 1122334455667788


For OSCam there are two ways, the path to the settings OSCam /etc/tuxbox/config/oscam/ and for the executable file //usr/bin/ which we replace. And so change we know what we have. Change will FTP, login root password of any, for this I use Total Commander

Mnigma mega oscam emu

Mnigma mega oscam emu

File //usr/bin/oscam first rename to any other, for example __oscam, then extruded from the downloaded archive file oscam (that new OSCam Emu 1.20 r11342 emu r735 ), and copy it to the folder //usr/bin/ . After you set the attributes to the file 755, for launching and implementation of the new oscam Emu 1.20 r11342 EMU r735.mega oscam mnigmaLeft to restart the tuner WeTeK Play and enjoy watching the decoded digital satellite TV.

oscam .user

user                          = root
betatunnel                    = 1833.FFFF:1702
the emulator =
group = 1,2
max_connections               = 5

user = monitor
pwd = monitor
monlevel = 4
group                         = 1

oscam file

logfile                       = /tmp/oscam.log
logduplicatelines             = 1
disableuserfile               = 0
clienttimeout                 = 9999
fallbacktimeout               = 7000
clientmaxidle                 = 9999999
nice                          = -1
LogLevel = 1500
waitforcards                  = 0
preferlocalcards              = 1
block_same_ip                 = 0
block_same_name               = 0
usrfile                       = /tmp/oscamuser.log
cwlogdir                      = /tmp/oscamcwdw.log
lb_save                       = 500
lb_min_ecmcount               = 3
lb_savepath                   = /tmp/.oscam/oscam.stat
failbantime                   = 15
failbancount                  = 3
suppresscmd08                 = 1
getblockemmauprovid = 1



enabled                       = 1
writechannelcache = 1
pmt_mode                      = 3
request_mode                  = 1
delayer                       = 60
ecminfo_type                  = 4
user = root
read_sdt = 2
write_sdt_prov = 1
extended_cw_api               = 2
box type = dreambox

port                          = 988
nocrypt =,
aulow = 120
monlevel = 4

httpport                      = 8888
httphelplang                  = ru
httprefresh                   = 10
httppollrefresh               = 10
httpshowmeminfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed =,,
aulow = 120
httposcamlabel = MegaOSCam
httpemmsclean = 0
httpemmgclean = 0

oscam. dvbapi

####### EMU ########
######Tricolor 36E######
(M):4AE0:000015 4AE0:0
####### NTV + 36E ########
(I): 0500:040610
(I): 0500:050100
(I): 0500:050B00 (I): 0500:060C00
P: 0500:060A00
P: 0500:040620
(I): 0500:040600
(P): 0500:041200#TRK_Ukraine & Football(5°E)
(P): 0500:023800#SRG_Swiss(13(E))
(P): 0500:024F00#Max TV(13(E))
(P): 0500:032830#CanalSat_France(19.2(E))
(P): 0500:041700#Red_light New Elite(13(E))
(P): 0500:042300#RTVI(13(E))
(P): 0500:042400#JSC_Sports(13(E))
(P): 0500:042800#BIS_TV(13(E))
(P): 0500:042700#SCT(13(E))
(P): 0500:043800#SCT/Red light HD(13(E))
(P): 0500:040810#SRG_Swiss(13(E))
(P): 0500:030B00 # TNT_France(19.2°E)
(P): 0500:007400#Half(13(E))
(P): 0B0F:000000#Xtra_TV(4W) 
(P): 0602:000000#continent(85,2(E))
(P): 0652:000000#Raduga(75(E))
######CYFRA+ и Полсат######### P:0100:000068:13F7:0afb#CINEMAX I:1803:000000:13F7:12C1#CINEMAX P:1803:000000:3D61:0B9D#Filmox I:0100:000068:3D61:0B61#Filmox I:0B01:000000:3D61:0B75#Filmox P:1803:000000:114(D):066A#HBO I:0100:000068:114(D):0# A45 HBO
P: 0100:00006A#Canal_Digitall ASTRA (19.2(E)), (23.5(E))
(P): 090(F):000000#Viasat_Baltic(5E / 75E)
(P): 093(E):000000#ViaSat_Litva(5E / 75E)
(P): 09CD:000000#Sky_Italian(13(E))
(P): 098(C):000000#Sky_Deutschland (19.2(E))
(P): 1702:000000#SKY_Germany(19.2(E)) 
######Cyfrowy Polsat 13Е ######
P:1803:000000#Cyfrowy Polsat 13Е I:1813:000000#Cyfrowy Polsat 13Е I:1861:000000#Cyfrowy Polsat 13Е I:0500:030100#Cyfrowy Polsat 13Е
P: 1810:000000#Digital+ HD(19.2(E))
(P): 1830:000000#HD + (19.2(E))
(P): 183(D):000000#TivuSat(13(E))
(P): 0D05:000000#ORF_Digital(19.2°E)
#####Seka #######
AND: 0100:00003D I: 0100:000080
(I): 0100:000086
(I): 0100:000088
####VIA####### I: 0500:032A10 I: 0500:032A00 (I): 0500:032920
(I): 0500:022A00 (I): 0616:000000
(I): 0919:000000
(I): 4ABF:000000