Замена на Оскам со Оскам 11342 ему 735 Рака енигма2 игра игра

Замена на Оскам со Оскам 11342 ему 735 Рака енигма2 игра игра

Спутниковый медиа бокс WeTek Play чудо иностранной техники которое я предлагаю доделать в плане открытия платных спутниковых телеканалов. Ова ќе стане можно со замена на целото време, или штатно установленный OSCam на новый OSCam версии svn r11342 emu r735.

Данная версия эмулятора оскам ему 1.20 svn 11342 emu r735 скомпилирована под процессор COrtex A9 Armv7 для использования на цифровых HD ресиверах WeTek Play с прошивкой Енигма 2: Мнигма, OpenPli и др.

oscam-emu-r11342_735-arm-linux-gnueabihf

Unix StartTime: 1484691982
Стартување:      18.01.2017 00:26:22
Верзија:        oscam-1.20-HPB-r661-EMU-r375-735-r11342
Compiler:       arm-linux-gnueabihf-libusb
Box type:       жена (генерички)
PID:            1683
Темпдир:        /tmp/.oscam
GBox TempDir:   /TMP/. Оскам
Конфигдир:      /etc/tuxbox/config/oscam/
WebifPort:      8888

Поддршка за веб -интерфејс:                   Да
Поддршка за живот:                         Да
jQuery Поддршка практикант:                   Да
Поддршка за интерфејс на допир:                 no
SSL support:                             Не
Поддршка за DVB API:                         Да
DVB API со поддршка од azbox:              Не
DVB API со поддршка на MCA:                Не
DVB API со поддршка од Coolapi:            Не
DVB API со поддршка од Coolapi2:           Не
DVB API со поддршка на Stapi:              Не
DVB API со поддршка на Stapi5:             no
DVB API read-sdt CHARSETS support:       Да
Ирдето претпоставува:                         Да
Анти-каскадна поддршка:                  Да
Режим на дебагирање:                              Да
Монитор:                                 Да
Поддршка за баланс на оптоварување:                   Да
Поддршка за размена на кеш:                  Да
Поддршка за проверка на циклусот CW:                  Да
Поддршка за ЛЦД:                             yes
LED support:                             Да
Clockfix со часовник во реално време:            Да
IPv6 поддршка:                            Не
Поддршка на емулаторот:                        yes

camd 3.3x:                               Да
CAMD 3.5 UDP:                            Да
CAMD 3.5 TCP:                            Да
Newcamd:                                 Да
CCCAM:                                   Да
CCCAM Сподели:                             Да
gbox:                                    Да
Раган:                                Да
измама:                                    Да
сериски:                                  Да
постојан CW:                             Да
Пандора:                                 Да
ghttp:                                   Да

Поддршка на читателот:                          Да

Награ:                                   Да
Ирдето:                                  Да
Конакс:                                   Да
Cryptoworks:                             вилушки
Суво:                                    Да
Вијацес:                                Да
NDS VideoGuard:                          Да
Dre crypt:                               Да
Тонгфанг:                                Да
Bulcrypt:                                Да
Грифин:                                 Да
Dgcrypt:                                 Да

ReadReader_phoenix:                      Да
ReadReader_internal_azbox:               Не
ReadReader_internal_coolapi:             Не
CardReader_internal_coolapi2:            Не
CardReader_internal_sci:                 Да
ReadReader_sc8in1:                       Да
ReadReader_mp35:                         Да
ReadReader_Smargo:                       Да
ReadReader_PCSC:                         Не
ReadReader_Smartreader:                  yes
cardreader_db2com:                       Да
CardReader_stapi:                        Не
ReadReader_stapi5:                       Не
CardReader_stinger:                      Да
ReadReader_drecas:                       Да

К делу, прошивка Mnigma, при первоначальной настройке системы выбираем и устанавливаем эмулятор OSCam (без emu). Для замены эмулятора OSCam на более новый оскам ему 1.20 svn 11342 ему r735 требуется заменить бинарник (исполняемый bin файл) который можно безвозмездно скачать по ссылке :

bin.oscam-emu-r11342_735-arm-linux-gnueabihf.7z 690 КБ

Special features:
===========
Pid-File control : without start-parameter "-Б" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

Веб -страница - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[сметка]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[сметка]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Ирдето"-Режим)


Веб -страница - Special WebIf-Design included


This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

Softcam.key:
OSCam-EMU does not require, but will make use of "Softcam.key" if available.
"Softcam.key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".


OSCam dvbapi config:
====================

If dvbapi is activated, the "delayer" option is forced to have a value of at least 60.
This is to avoid freezes/crashes because of too fast ecm responses.


New Parameter:
==============

Process EMM from stream:
Webif -> Config -> Stream Relay -> Process EMM from stream
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_emm_enabled = 0 or 1


BISS/ConstCW config:
====================

Syntax for keys in SoftCam.Key: (key number can be '00' or '01')
F <ID на услугата><ECM PID> <Клучен број> <клуч>

Example:

ID на услугата: 2222
ECM PID: 1111
клуч: 0102030405060708

F 22221111 00 0102030405060708

Important:
The correct ecm pid is only available when using oscam dvbapi.
на пример:
Оскам (Dvbapi) <-> OSEmu
oscam (Dvbapi) <-> Оскам <-> OSEmu

When using another client like cccam, the ecm pid seen by OSEmu will always be '1FFF'
For example:
cccam <-> Оскам <-> OSEmu
cccam <-> OSEmu
In this case the above example key line needs to be changed to:
F 22221FFF 00 0102030405060708

PowerVU config:
===============

Keys in SoftCam.Key:

Стр <groupid><srvid> <nb> <клуч>
Where:
groupid = any 4 hex digits of your choice for this group (leading zeros are optional)
srvid = SID (ID на услугата) of channel in hex with leading zeros to make 4 hex digits.
nb = key number (00/01)
key = ecm key

Example groupid=0x1, sid=0x1234, keys 00 and 01:
Стр 00011234 00 11223344556677
Стр 011234 01 22334455667788

Example groupid=0x2, sid=0x34, keys 00 and 01:
Стр 00020034 00 00112233445566
Стр 0020034 01 00223344556677

For channels with the same srvid the correct key will be detected automatically, but each key needs a unique groupid.
P 009E0234 01 11223344556677
Стр 00040234 01 22334455667788
P 013E0234 01 33445566778899

WARNING - duplicate <groupid><srvid> are not allowed anymore - only the last instance will be used!

AU keys:
Стр <groupid> <UA> <клуч>
example:
P 009E 11223344 11223344556677
P 009E 44332211 22334455667788
Стр 0004 22334455 33445566778899
P 013E 00112233 00112233445566

Multiple UA keys are allowed for each group and each UA will update ALL ecm keys in the group.

NOTE: in order to work, the ecm keys must be "seeded" in the file for each SID you want to update since the UA has no information about sids.
So to add a key that is unknown, enter a dummy key to get updated, на пример:

Стр 00010004 00 00000000000000000
Стр 00010004 01 00000000000000000

Also note: Duplicate powervu keys are no longer allowed (unnecessary since duplicate SIDs should now have a unique group ID.)
So, if there are any duplicates, only the last key in the file will be used.
This also means that as new keys are found and appended to the file, they will automatically replace earlier keys.


On compatible Dreambox STBs:

1) Disable the Stream Relay:
Webif -> Config -> Stream Relay -> Режим
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_relay_enabled = 0

2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
0 - disabled (default)
1 - OE 2.2
2 - OE 2.0

or in oscam.conf:

[Dvbapi]
extended_cw_api = 2


On other devices the Stream Relay must be used:

IMPORTANT:
The stream relay needs a fast CPU. Not every STB is fast enough.
If you cannot fix stuttering with the following guide, likely your CPU is
too slow.

For best performance, the "Include ECM in http streams" setting must be enabled.
If your image supports it (OpenPLI, OpenATV), you can find it here:
OpenWebif -> Settings -> Customize

If the setting is not available, you may need to adjust the "ECM fix delay"
setting in oscam webif (Config -> Stream Relay).
Increase/Lower it until there is no stuttering.

When using VU+ devices, make sure to use the latest drivers (June 2015), if
you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
https://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
https://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
Б. Right click on a channel, select "IPTV and other streaming services", select "Додадете".
В. Select "DVB/TS".
г. Chosse a name and use the new stream link as URL.
Е. Use the "ID на услугата" of the original channel. You can find it in the left list ("Services")


Drecrypt config:
================

Keys from ee.bin files:

Put "ee36.bin" and "ee56.bin" into the config folder (where SoftCam.Key is).
Or: set a custom path for these files with the "exee36" and "exee56" reader settings.

Keys in SoftCam.Key:

Overcrypt keys (16 keys):
г 0 <number> <клуч>
example:
г 0 0 1122334455667788
...
г 0 F 1122334455667788

AU keys:
г <caid><Провајдер> MK<key type><key index> <клуч>
example:
D 4AE1FF MKAA01 112233445566778899AABBCCDDEEFF0011223344556677889900AABBCCDDEEFF


Tandberg config:
===============

Keys in SoftCam.Key:

T <entitlement> 01 <клуч>

на пример (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <клуч>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <клуч>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788

Для OSCam имеют место два пути, путь к настройкам OSCam /etc/tuxbox/config/oscam/ и к самому исполняемому файлу /usr/bin/ который мы и заменим. И так что менять мы знаем на что мы имеем. Менять будем по фтп, логин root пароль любой, для этого я использую Total Commander

Mnigma mega oscam emu

Файл /usr/bin/Оскам сперва переименовываем в любой другой, к примеру __oscam, потом вытянутый из скачанного архива файл oscam (который новый OSCam Emu 1.20 r11342 emu r735 ), и скопировать его в папку /usr/bin/ . После выставить атрибуты файлу 755, для возможности запуска и выполнения нового оскам ему 1.20 Р11342 ему r735.Осталось перезагрузить тюнер WeTeK Play и наслаждаться просмотром раскодированных цифровых спутниковых телепрограмм.

[Читател]
label                         = emulator
protocol                      = emu
device                        = emulator
fallback                      = 1
caid                          = 0D00,0D02,0500,1801,0604,2600,FFFF,0E00,4AE1
deskey                        = 4A1123B14599CF10211B18CD02D4A11F0756ABB44531AA23CDF255A1134CF17657D93175139889C8A3365B18C28345E219F73508C3DAE128E719B5D88DE323A4A7ECD2158B4259C51349832EFBAD7CD3372578E3721953D97A15A4C7154932E863D596A727D8B268425E1A8C41698EE8C2AB3729D3CF93A749D333C2EB71D314
detect                        = cd
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008В,0000A0,0000A4,0000A8;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4Ае:000011,0000FE
group                         = 2
emmcache                      = 2,3,2,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
lb_weight                     = 200
lb_force_fallback             = 1
emu_auproviders               = 0500:030B00;0604:010200;0E00:000000;4Ае:000011,0000FE
extee36                       = /etc/tuxbox/config/oscam/ee36.bin
extee56                       = /etc/tuxbox/config/oscam/ee56.bin
dre36_force_group             = 05

oscam.user

[сметка]
user                          = root
betatunnel                    = 1833.FFFF:1702
au                            = emulator
group                         = 1,2
max_connections               = 5

[сметка]
user                          = monitor
pwd                           = monitor
monlevel                      = 4
group                         = 1

oscam.conf

[global]
logfile                       = /tmp/oscam.log
logduplicatelines             = 1
disableuserfile               = 0
clienttimeout                 = 9999
fallbacktimeout               = 7000
clientmaxidle                 = 9999999
nice                          = -1
maxlogsize                    = 1500
waitforcards                  = 0
preferlocalcards              = 1
block_same_ip                 = 0
block_same_name               = 0
usrfile                       = /tmp/oscamuser.log
cwlogdir                      = /tmp/oscamcwdw.log
lb_save                       = 500
lb_min_ecmcount               = 3
lb_savepath                   = /tmp/.oscam/oscam.stat
failbantime                   = 15
failbancount                  = 3
suppresscmd08                 = 1
getblockemmauprovid           = 1

[cache]

[streamrelay]

[Dvbapi]
enabled                       = 1
writechannelcache             = 1
pmt_mode                      = 3
request_mode                  = 1
delayer                       = 60
ecminfo_type                  = 4
user                          = root
read_sdt                      = 2
write_sdt_prov                = 1
extended_cw_api               = 2
boxtype                       = dreambox

[monitor]
port                          = 988
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255
aulow                         = 120
monlevel                      = 4

[Веб -страница]
httpport                      = 8888
httphelplang                  = ru
httprefresh                   = 10
httppollrefresh               = 10
httpshowmeminfo               = 1
httpshowecminfo               = 1
httpshowloadinfo              = 1
httpallowed                   = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255
aulow                         = 120
httposcamlabel                = MegaOSCam
httpemmsclean                 = 0
httpemmgclean                 = 0

OSCAM.DVBAPI

####### ему ########
Стр:2600:000000
Стр:0E00:000000
######Tricolor 36E######
P:4AE0:000015
М:4AE0:000015 4AE0:0
Стр:4AE0:0
####### NTV+ 36E ########
Јас: 0500:040610
Јас: 0500:050100
Јас: 0500:050B00
I: 0500:060C00
P: 0500:060A00
P: 0500:040620
Јас: 0500:040600
Стр: 0500:041200#TRK_Ukraine & Football(5°E)
Стр: 0500:023800#SRG_Swiss(13Е)
Стр: 0500:024F00#Max TV(13Е)
Стр: 0500:032830#CanalSat_France(19.2Е)
Стр: 0500:041700#Red_light New Elite(13Е)
Стр: 0500:042300#RTVI(13Е)
Стр: 0500:042400#JSC_Sports(13Е)
Стр: 0500:042800#BIS_TV(13Е)
Стр: 0500:042700#SCT(13Е)
Стр: 0500:043800#SCT/Red light HD(13Е)
Стр: 0500:040810#SRG_Swiss(13Е)
Стр: 0500:030B00#TNT_France(19.2°E)
Стр: 0500:007400#Mezzo(13Е)
Стр: 0B0F:000000#Xtra_TV(4w) 
Стр: 0602:000000#Kontinent(85,2Е)
Стр: 0652:000000#Raduga(75Е)
######CYFRA+ и Полсат#########
P:0100:000068:13f7:0afb#CINEMAX
I:1803:000000:13f7:12C1#CINEMAX
P:1803:000000:3D61:0B9D#Filmox
I:0100:000068:3D61:0B61#Filmox
I:0B01:000000:3D61:0B75#Filmox
P:1803:000000:114г:066A#HBO
I:0100:000068:114г:0A45#HBO
######N#######
P:0b01:000000#N
P: 0100:00006A#Canal_Digitall ASTRA (19.2Е), (23.5Е)
Стр: 090F:000000#Viasat_Baltic(5E/75E)
Стр: 093Е:000000#ViaSat_Litva(5E/75E)
Стр: 09CD:000000#Sky_Italian(13Е)
Стр: 098В:000000#Sky_Deutschland (19.2Е)
Стр: 1702:000000#SKY_Germany(19.2Е) 
######Cyfrowy Polsat 13Е######
P:1803:000000#Cyfrowy Polsat 13Е
I:1813:000000#Cyfrowy Polsat 13Е
I:1861:000000#Cyfrowy Polsat 13Е
I:0500:030100#Cyfrowy Polsat 13Е
P: 1810:000000#Digital+ HD(19.2Е)
Стр: 1830:000000#HD+ (19.2Е)
Стр: 183г:000000#TivuSat(13Е)
Стр: 0D05:000000#ORF_Digital(19.2°E)
Стр:1010:000000
#####SEKA#######
I: 0100:00003D
I: 0100:000080
Јас: 0100:000086
Јас: 0100:000088
####VIA#######
I: 0500:032A10
I: 0500:032A00
I: 0500:032920
Јас: 0500:022A00
I: 0616:000000
Јас: 0919:000000
Јас: 4ABF:000000
Јас:0