Refinement of cooling media player VS IP015 with their own hands
And so begin
In modern media players problem cooling the processor and all its components is solved relatively simply, for example with the purchase of a more powerful radiator, cooler or at worst method for lazy just remove the cover unit. For owners of media player VS IP015 no such expanse with interchangeable parts and have to settle for the original manufacturer's design solutions.
But sometimes it, that factory decision not held very optimal and media pleerak reacts to any load.
As was said above special radiators for Media Player VS IP015 is not for sale and there are several reasons for this: each media player has its own design and the manufacturer hopes that his decision will be the best.
And so after opening our patient VS IP015 looked like this:
The question arose, How to unstick the heatsink from the processor?
Don't rush! You need to take up the radiator and slightly move it on the processor, twisting clockwise and counterclockwise and, How would moving it to the side. Luft quite small, normally, not more than 5 mm, but that's enough. On top of this should be done slowly t. to. pasta will resist, but soon you will feel that this is not necessary to apply such efforts, the radiator will move much easier. When you feel this ”the weakening of the ” thermal paste, try it with little effort to tilt the heat sink. If it detaches, continue movement, Try tilting the other way. Here the most important thing – do not remove the processor from the socket and not damage it.
Cheers. Radiator in hand!
Now take the Thermo-adhesive and lubricates a new heatsink and processor AML8726MX. And firmly fix the heatsink on the processor until the glue.
I also kapnul Silicone adhesive around the edges of the radiator, as shown in the picture.