在OSCam更換OSCam 11310 鴯 733 DRE手臂Enigma2дляWeTeK播放

123
Очень плохоПлохоСреднеХорошоОтлично (目前尚無評估)
中...

在OSCam更換OSCam 11310 鴯 733 DRE手臂Enigma2дляWeTeK播放

衛星媒體盒 WeTeK播放 奇蹟國外技術,我建議在完成開放付費衛星電視的術語. 這將是可能的替換工作人員, 或有機OSCam安裝了新的 OSCam версии svn r11310 emu r733.

OSCam WeTeK Play oscam-emu-r11279_732-arm-linux-gnueabihf-ssl-libusb

11310.DRE
	- 我修復雙重釋放內存
	- 他回到了日誌信息當前索引和關鍵klase為DRE2
	- вернул фильтрацию по сиду sid =

Changeset 11293
[GBX]
固定本地卡變革 (卡檢測/彈出) not reported to peers
Change two defaults to more reasonable values 

Changeset 11292
-Webif
-Correct cooldown parameter in webif

Changeset 11291
-完善Webif配置屏幕.
-Add httpreadonly as a parameter in the webif
-Make all config parameters for the webif clickable to point to the Wiki
-Small reorganization of the parameters that display additional infos in the Status screen to place then in the same order as they are displayed when we enable them.

[GBX]
- 新增功能
- 從具體的同行塊ECM(小號)
- 忽略特定對(小號) 完全
- 修復警告REF. cs_readlock超時
- 代碼清理和化妝品

[文件]
- 添加可選的參數oscam.conf [GBOX]:
- block_ecm =的peer_id[,的peer_id ...]
- ignore_peer =的peer_id[,的peer_id ...]

這個版本的模擬器 OSCam_Emu 1.20 SVN 11310 鴯鶓R733 由裝置C編譯ortex A9 的ARMv7 用於在數字HD接收器使用 WeTeK播放 固件 謎 2: Mnigma, OpenPli等。.

oscam-EMU-r11310_733臂-Linux的gnueabihf

Unix的開始時間: 1483505558
開始時間:      04.01.2017 06:52:38
版:        oscam-1.20-megavolt85_-r11310
Compiler:       arm-linux-gnueabihf
Box type:       wetek (通用)
PID:            3558
TEMPDIR:        /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam/
WebifPort:      8888

GBOX TMP_DIR:   使用沒有定義: /tmp/.oscam
                value read during start up, 如果webif後改為不刷新!

Web界面支持:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 yes
SSL support:                             no
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API read-sdt charsets:               yes
Irdeto guessing:                         yes
Anti-cascading support:                  yes
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Emulator support:                        yes
Clockfix with realtime clock:            yes
IPv6 support:                            no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    yes
radegast:                                yes
scam:                                    yes
serial:                                  yes
constant CW:                             yes
Pandora:                                 yes
ghttp:                                   yes

Reader support:                          yes

Nagra:                                   yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       yes
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       yes
cardreader_mp35:                         yes
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  no
cardreader_db2com:                       yes
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      是

 

業務, Mnigma固件, 系統的初始設置期間被選擇並安裝在仿真器OSCam (沒有鴯鶓). 要更換OSCam模擬器到一個新的 OSCam_Emu 1.20 SVN 11310 鴯鶓R733 它想取代二進制 (斌的可執行文件) 這裡可以免費下載 :

bin.MegaOSCam-r11310-emu733-dre-wetek-cortexa9hf-linux.zip 687 KB

如果三色發誓 “錯誤: deskey缺失或太短” 然後添加到讀取器設置

deskey = 4A1123B14599CF10211B18CD02D4A11F0756ABB44531AA23CDF255A1134CF17657D93175139889C8A3365B18C28345E219F73508C3DAE128E719B5D88DE323A4A7ECD2158B4259C51349832EFBAD7CD3372578E3721953D97A15A4C7154932E863D596A727D8B268425E1A8C41698EE8C2AB3729D3CF93A749D333C2EB71D314

對於OSCam有兩種方式, 辦法OSCam設置 /等/ tuxbox /配置/ oscam / 和大多數的可執行文件 /USR /斌/ 這是我們替換. 所以,我,我們知道我們有什麼. 更改將在FTP, 用戶名root密碼每, 為此,我使用 總指揮官

Mnigma大型oscam鴯鶓

文件 /USR /斌/oscam 第一重命名任何其他, 例如__oscam, 然後從下載的存檔文件oscam擴展 (который новый OSCam_Emu 1.20 r11310 emu r733 ), 並將其複製到文件夾 /USR /斌/ . 在設置文件屬性 755, 為開展和實施新的 OSCam_Emu 1.20 r11310 emu r733.它仍然重啟調諧器WeTeK播放和欣賞解碼數字衛星電視.

 

oscam.user

[帳戶]
user                          = root
betatunnel                    = 1833.FFFF:1702
au                            = emulator
group                         = 1,2
MAX_CONNECTIONS = 5

[帳戶]
user                          = monitor
pwd                           = monitor
monlevel                      = 4
組= 1

oscam.conf

[全球]
logfile                       = /tmp/oscam.log
logduplicatelines             = 1
disableuserfile = 0
clienttimeout = 9999
fallbacktimeout = 7000
clientmaxidle = 9999999
漂亮= -1
LogLevel的= 1500
waitforcards = 0
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
usrfile                       = /tmp/oscamuser.log
cwlogdir                      = /tmp/oscamcwdw.log
lb_save                       = 500
lb_min_ecmcount = 3
lb_savepath                   = /tmp/.oscam/oscam.stat
failbantime                   = 15
failbancount = 3
suppresscmd08 = 1
getblockemmauprovid = 1

[高速緩存]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
啟用= 1
為= 1
pmt_mode = 3
request_mode = 1
延時= 60
ecminfo_type = 4
user                          = root
boxtype                       = dreambox

[監控]
端口= 988
nocrypt; 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120
monlevel = 4

[捲筒紙]
HTTPPORT = 8888
httphelplang                  = ru
http_prepend_embedded_css     = 1
httprefresh = 10
httppollrefresh = 10
httphideidleclients = 0
httpshowmeminfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.1-10.255.255.255
aulow = 120
httposcamlabel                = MegaOSCam
httpemmsclean                 = 0
httpemmgclean = 0

 

oscam.dvbapi

P:4AE1:11::::102
P:4AE1:11::::10000102
P:4AE1:FE
I:0

你也許也喜歡...