OScam emulator Android into digital hybrid satellite receiver WeTeK Play adds kardšaringa function (Server and client) and access to encoded channels using keys, I introduce NEW OSKAM + HE WeTeK for Android OSOscam: 1.20-unstable_svn Build: r10947 Compiler: arm-linux-androideabi-ssl [EMU] oscam-emu version 716
Unix starttime: 1439917972
Starttime: 18.08.2015 20:12:52
Version: oscam-1.20-unstable_svn-r10947
Compiler: arm-linux-androideabi-ssl
Box type: generic (generic)
TempDir: /tmp/.oscam
ConfigDir: /sdcard/config/
WebifPort: 8888
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes
Reader support: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: And it is
dry: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes
cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: Yes
Of the major changes is the Speed +20% and the availability of Emulator (oscam-emu version 719) for realizing files SoftCam Key and working with character encodings:
- CryptoWorks
- SoftNDS
- Viaccess 1/2/3
- Nagra 2
- Irdeto 2
- BiSS (Mode 1) [Note: only 1 key possible for a sid/pid combination, use the oscam constcw reader if you need more]
- Powervu (via Stream Relay)
- Drecrypt2 *experimental, most likely some fixes are needed*
Ninja_OStool 1.3 + EMU_byGuRu.zip 1.7 About WordPress(OStool_ 1.10932) And so the archive with the program OStool_ 1.10932 and file SoftCam Key
UPDATED
2015/08/18 20:07:13 00000000 s >> Oscam << cardserver log switched, version 1.20-unstable_svn, build r10947 (arm-linux-androideabi-ssl)
2015/08/18 20:07:13 00000000 s (main) System name = Linux
2015/08/18 20:07:13 00000000 s (main) Host name = localhost
2015/08/18 20:07:13 00000000 s (main) Release = 3.0.50-wetek
2015/08/18 20:07:13 00000000 s (main) Version = #1041 SMP PREEMPT Wed Jul 15 12:51:42 HONOR 2015
2015/08/18 20:07:13 00000000 s (main) Machine = armv7l
2015/08/18 20:07:13 00000000 s [EMU] oscam-emu version 719
2015/08/18 20:07:13 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/08/18 20:07:13 00000000 s (main) signal handling initialized
2015/08/18 20:07:13 00000000 s (main) Cannot open /tmp/.oscam/oscam.version (errno=13 Permission denied)
2015/08/18 20:07:13 00000000 s (reader) satq [cccam] creating thread for device ua5.satq.tv
2015/08/18 20:07:13 00000000 s (main) waiting for local card init
2015/08/18 20:07:13 3C471E54 h (Web) Web: decompressed 163941 bytes back into 392432 bytes
2015/08/18 20:07:13 3C471E54 h (Web) HTTP Server running. ip=0.0.0.0 port=8888
2015/08/18 20:07:14 19CC1265 p (reader) ua5.satq.tv: resolved ip=213.155.22.174
2015/08/18 20:07:14 19CC1265 p (reader) satq [cccam] connecting to ua5.satq.tv:9999
2015/08/18 20:07:14 19CC1265 p (reader) satq [cccam] proxy initialized, server ua5.satq.tv:9999
2015/08/18 20:07:14 00000000 s (main) init for all local cards done
2015/08/18 20:07:14 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2015/08/18 20:07:14 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2015/08/18 20:07:14 00000000 s (anticasc) anti cascading disabled
2015/08/18 20:07:14 55288101 c (client) plain dvbapi-client rejected (dvbapi protocol not allowed)
2015/08/18 20:07:14 55288101 c (dvbapi) dvbapi channelcache loaded from /sdcard/config/oscam.ccache
2015/08/18 20:07:14 55288101 c (dvbapi) Detected /dev/dvb0.demux0 Api: 0, userconfig boxtype: 1
Installation OSTool Oscam emulator installed on the receiver WeTeK Play.
Interface OSTool
To automatically run the program OStool at startup activate ”Start on boot ”
Enter data in the OStool interface for customizing Oscam:
To configure the kardšaringa (WeTek receiver as a client ) run the emulator OStool At the beginning you should choose the necessary protocol exchanges between receiver and server, most often this newcamd or cccam; – Labe – The name of the; – Description – Description(not necessarily) – device – IP or domain address server sharing ratio, the port number. Example of ”tv1.sharik.tv,10002 \”; – user – The name of the user, received when registering on the server w @ pipeline; – password – Password, obtained during the registration at the server w @ pipeline; – InactivityTimeout – No activity timeout in seconds; – key – DES key, leave as is, or enter, that would point to server sharing ratio;
To confirm data entry do not forget to click ”Save ”. Digits entered directly remote control.
At the end you must restart to activate Oscam.
OStool configuration using the Web interface
In the Web interface you can track Oscam: – the logs of connections to the server; – authorization on the server your sh @ pipeline; – time ms response from the server; The same Office, Customizing Oscam Emu and reboot; You can also enter the presets — Files oscam version. oscam file oscam .user oscam. server oscam. srvid oscam. dvbapi
The Web page interface for Oscam address HTTPS://wetek_ip:8888 , pass authorization, Enter login: Admin, password: Admin .
So you've gone, proceed to add reader:
Requires just 4and pressing, in the order that is specified in the picture. Newcamd pointed out as this is the most popular protocol for all w @ rovodov.
Then configure the reader:
Watch The Config – DVB-Fire
Bring to the same condition as in the picture
To open some channels in packages, porn, etc.. need dvbapi, standard it provides itself šaravod :
looks like this:
(P): 2600:000000 #only
P: 0500:040600 #NTV
P: 0500:040620 #NTV mpeg4 & HD
I: 0500:050B00 #NTV HD
P: 0500:023100 #TRK Ukraine & Football 5°E
P: 0500:041700 #Full XXXL
P: 0500:043800 #Full XXXL
P: 0500:042800 #Full XXXL
P: 0500:042700 #Full XXXL
P: 1803:000000 #Full XXXL
P: 4Ae1:000000 #Tricolor
P: 4Ae1:000002 #Tricolor
P: 0B0F:000000 #xtraTV
J: 4ae0:11:0a3f 4ae1:11:27 Option settings OSTool he same Oscam cccam Protocol
Editing option settings for FTP login: root, password: hdbox: FTP path where the configs : /MNT/shell/emulated/0/config/ or just /SDCard/config/
Accordingly, on this way, you can edit the configuration in a text editor Notepad ++ , OScam requires a reboot after editing Ability to work with a familiar file SoftCam Key
The archive file is SoftCam Key It needs to be put in a folder /MNT/shell/emulated/0/config/ forthe emulator is activated . Total /SDCard/config/SoftCam Key
A good result on the speed of switching channels gives configuration Android Oscam Emu r10947
Now information from encoding OScam, rider cash appears in WeTeK Theater If no data, exit WeTeK Theater , go in OStool and click ”Stop ” and later 5-7 seconds click ”Start ”.
Go back to WeTeK Theater